 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
| 10 Series: | 11 Series: | 18 Series: | 30 Series: | 1001 Series: | 16 Series: | 17 Series: | 111 Series: | 801 Series: |
 |
DUAL IN-LINE RELAY "A" COIL LAST ENERGIZED |
| 15 SERIES | Magnetic Latch DPDT, Bi-stable |
| The Electrodyne type 15 series relay is a low cost, micro-miniature, environmentally sealed, double pole double throw relay, with terminals spaced on a .100 inch grid spacing. Its small size, weight and volume makes it ideal for use in high density, low profile, electronic packaging. With terminals spaced on a .100 inch grid spacing, it is designed to be mounted into standard sockets or circuit boards on the same lead spacing. We invite your inquiries on the standard relays or any other variations to fit your specific needs. |
|
| SPECIFICATIONS |
| MECHANICAL | ELECTRICAL | |
| Weight: | 4.5 grams max. | Duty Cycle: Continuous |
| Enclosure: | Plastic 94 V0/94-5V | Insulation Resistance: |
| Volume: | 0.16 cubic inches | @ 25° C 10,000 megohms min. @ 500VDC |
| Markings: | Trade name, Cat. No., Date Code, and Schematic | @ 75° C 1,000 megohms min. @ 500VDC |
| Dielectric Strength: | ||
| 1,000 VRMS coil to contact @ 1KHz 350 VDC contact to contact. |
||
| ENVIRONMENTAL | Contacts: | |
| Temperature: | -55° C to +75° C | Arrangement Two form C (DPDT) |
| Vibration: | 0.1" double amplitude or 20G peak from 10 to 3000 Hz. | Resistance 0.05 ohm max. (measured at 6VDC, 0.1 to 1.0 amp) |
| Shock: | 100G for 11 ms. | Rating: |
| Hi level 2.0 A., 30 VDC, resistive load Lo level 10 µAmps, 5MV, 50 ohm max. resistance |
||
| Life: | ||
| Hi level 100,000 operations/min. Lo level 1,000,000 operations/min. |
||
Home Page 
10 Series
11 Series
16 Series
17 Series
18 Series
30 Series
111 Series
801 Series
1001 Series
 "Contact Us!"Last Updated:January 28, 1998 Copyright 1997-1998 Electrodyne, Inc. All Rights Reserved Website Produced by iSITE Communications |