ELECTRODYNE, INC.

11200 SE 21st Street, Milwaukie, OR 97222 TEL (503) 654-0711/FAX (503) 654-1959


10 Series:	15 Series:	18 Series:	30 Series:	1001 Series:		16 Series:	17 Series:	111 Series:	801 Series:

	DUAL IN-LINE RELAY
11 SERIES	Sensitive DPDT

The Electrodyne type 11 series relay is designed to switch certain capacitive and lamp loads that would normally weld the contacts of miniature reed relays. Its small size, weight and volume make it ideal for use in high density, low profile, electronic packaging. With terminals spaced on a .100 inch grid spacing, it is designed to be mounted into standard sockets or circuit boards on the same lead spacing. We invite your inquiries on the standard relays or any other variations to fit your specific needs.

Driven directly from CMOS and TTL logic
High shock and vibration resistance
Available with internal diode for arc suppression
Expected life: mechanical 10 million operations
Environmantally sealed
Capacitance: N.C. to N.O. .2 pF, movable contact to coil .7 pF.

SPECIFICATIONS

MECHANICAL ELECTRICAL

Weight: 4.5 grams max. Duty Cycle: Continuous

Enclosure: Plastic 94 V0/94-5V Insulation Resistance:

Volume: 0.16 cubic inches    @ 25° C    10,000 megohms min. @ 500VDC

Markings: Trade name, Cat. No., Date Code, and Schematic    @ 75° C    1,000 megohms min. @ 500VDC

Dielectric Strength:

   1,000 VRMS coil to contact @ 1KHz
   350 VDC contact to contact.

ENVIRONMENTAL Contacts:

Temperature -55° C to +75° C    Arrangement    One form C (SPDT)

Vibration: 0.06" double amplitude 10 to 55 Hz or 10G peak to 500 Hz.    Resistance    0.05 ohm max.
(measured at 6VDC, 0.1 to 1.0 amp)

Shock: 50G for 11 ms. Rating:

   Medium Duty    2.0 A., 28 VDC, resistive load
   Light Duty    Dry circuit to 1 amp 28 VDC

Expected Life:

   Medium Duty    1,000,000 operations/min.
   Light Duty    10,000,000 operations/min.

Home Page dot 10 Series dot 15 Series    16 Series
17 Series dot 18 Series dot 30 Series    111 Series    801 Series    1001 Series

"Contact Us!"

Last Updated:January 28, 1998
Copyright 1997-1998 Electrodyne, Inc.
All Rights Reserved

Website Produced by iSITE Communications

MECHANICAL		ELECTRICAL
Weight:	4.5 grams max.	Duty Cycle: Continuous
Enclosure:	Plastic 94 V0/94-5V	Insulation Resistance:
Volume:	0.16 cubic inches	@ 25° C 10,000 megohms min. @ 500VDC
Markings:	Trade name, Cat. No., Date Code, and Schematic	@ 75° C 1,000 megohms min. @ 500VDC
		Dielectric Strength:
		1,000 VRMS coil to contact @ 1KHz 350 VDC contact to contact.
ENVIRONMENTAL		Contacts:
Temperature	-55° C to +75° C	Arrangement One form C (SPDT)
Vibration:	0.06" double amplitude 10 to 55 Hz or 10G peak to 500 Hz.	Resistance 0.05 ohm max. (measured at 6VDC, 0.1 to 1.0 amp)
Shock:	50G for 11 ms.	Rating:
		Medium Duty 2.0 A., 28 VDC, resistive load Light Duty Dry circuit to 1 amp 28 VDC
		Expected Life:
		Medium Duty 1,000,000 operations/min. Light Duty 10,000,000 operations/min.